Emergency Disposal: A Core Skill in Hazardous Chemical Transportation
Leakage during the transportation of hazardous chemicals is a frequent sudden safety accident. Leakage of different types of hazardous chemicals will cause chain risks such as combustion, explosion, poisoning, corrosion and water pollution.
Standardized, rapid and scientific emergency disposal can minimize accident hazards and is a core skill that hazardous chemical transportation practitioners must master. According to the Provisions on the Administration of Road Transportation of Dangerous Goods, when a dangerous situation occurs to a transportation vehicle, drivers and escorts shall activate the emergency plan immediately to avoid secondary accidents caused by blind disposal.
1. Park Safely and Avoid Risks First
After leakage occurs, the first step is to park the vehicle safely and avoid risks. The driver shall decelerate smoothly, park the vehicle in an open and safe area far away from residential areas, schools, water sources, gas stations and high-voltage lines, immediately turn on the vehicle hazard warning lights, and set up warning signs at a specified distance in the incoming direction to remind passing vehicles to avoid.
Parking in closed spaces and low-lying areas is strictly prohibited to prevent the accumulation of toxic and flammable gases which may cause explosion and poisoning accidents. At the same time, organize on-board personnel to evacuate quickly to the upwind and cross-upwind safe areas away from the leakage pollution source.
2. Judge the Leakage Type and Carry Out Targeted Disposal
Accurately judging the type of leakage is essential for effective disposal. The table below summarizes targeted responses for the three most common categories:
| Leakage Type | Key Disposal Actions | Strictly Prohibited |
|---|
| Flammable liquid | Cut off vehicle power supply; use special leakage plugging pads and absorbent cotton to block the leak point | Open fire, static contact, and flushing directly with water |
| Corrosive chemical | Wear full acid and alkali resistant protective equipment; cover and solidify with dry sand and adsorption materials | Direct skin and respiratory contact with pollutants |
| Toxic gas | Evacuate surrounding people quickly; implement on-site isolation and warning | Allowing irrelevant personnel to approach |
3. Report in a Standardized Manner and Cooperate with Rescue
After preliminary on-site disposal, the escort shall call the emergency rescue, traffic and fire departments immediately, and accurately report the following information without concealing or falsely reporting the danger:
- Accident location — precise and easy to locate;
- Name of leaked chemicals and hazard category — clarifying the risk nature;
- Leakage scale and on-site personnel situation — supporting rescue resource planning.
Meanwhile, protect the accident site, retain waybills and cargo information, and cooperate with professional rescuers to carry out subsequent cleaning, detection and disposal work. Unauthorized evacuation and illegal on-site cleaning are prohibited to ensure the whole process of accident disposal is compliant and controllable.
Conclusion: Preparedness Turns Crisis into Control
Hazardous chemical leakage disposal follows a clear logic — avoid risk, dispose in a targeted way, and report standardly. Mastering this three-step emergency process enables transport teams to reduce secondary accidents, protect people and the environment, and keep every dangerous goods journey safe and compliant.
আপনার বার্তাটি 20-3,000 টির মধ্যে হতে হবে!
